Premium White
Elastomeric Roof Coating
• 15 Year Warranty
• Forms a Durable Rubber Membrane
• Meets ASTM D 6083
• Superior Quality Industrial Formula
• Highest Solids for Maximum Film Build
• Apply by Roller, Brush, or Spray
Sizes Available: 4.75 Gallon Pail, .9 Gallon Pail
Coverage: 50-70 Square Feet Per Gallon
Description
SealBest Premium Professional Grade White Elastomeric Roof Coating is a superior performing product featuring unmatched adhesion, low temperature flexibility and durability. This product exceeds the stringent performance specifications required by ASTM-D6083. Forms a tough, durable rubber membrane over a variety of roof surfaces.
Uses
EDPM rubber roofs, polyurethane foam, APP and SBS modified bitumen, asphalt, mobile homes and RV’s, concrete, wood and more. NOTE: This product is not recommended for gravel, dead level (flat), or shingled roof surfaces.
Directions
Clean Roof - Sweep off all dirt, dust, and debris. Remove rust, mildew, oil, grease, or other foreign material on the surface. Allow freshly applied asphalt roofs to cure a minimum of 4 weeks prior to applying this coating. Scrub roof with SealBest Concentrated Roof Cleaner or bleach solution (1 part chlorine bleach and 3 parts water). Rinse thoroughly and allow to dry.
EPDM ROOFS - When coating EPDM roofs it is extremely important to remove all dust, dirt, and embedded clay to assure proper adhesion. Thoroughly scrub roof surface with SealBest Concentrated Roof Cleaner or bleach solution (1 part chlorine bleach and 3 parts water) and pressure wash entire roof surface. Use a wide tip on pressure washer to prevent tearing roof material. Allow surface to dry.
Applying Roof Coating - Stir pail thoroughly. Do not dilute. For best results apply White Elastomeric Roof Coating with a soft brush, 3/4” nap paint roller, or high pressure sprayer. For optimum performance, durability and warranty purposes, apply a second coat.
|
|
