logo header
  home about us contact us how to/help blacktop faq
  products where to buy literature sds sheets bar  
         
reflectprod.shtmlproductnavagriculture  


SealBest 1000
10x Heavy-Duty Advanced Acrylic Driveway Sealer & Filler

• 10 Year Warranty
• Beautifies & Protects Asphalt Driveways
• Dries to a Deep, Rich Black Color
• Advanced, E-Z Stir Gel Formulation for Easy Mixing & Application
• Acrylic Modified for Superior Strength & Flexibility
• Fortified with Sand for Traction & Durability
• Superior Protection from Salt & Chemicals
• The Highest Solids for Maximum Durability
• Fastest Drying - Foot Traffic in One Hour


Sizes Available: 4.75 Gallon Pail - Coverage: 250-350 Square Feet

SDS Sheet (pdf) Tech Data Sheet pdf icon (pdf)

Description
A heavy-duty advanced acrylic, fast drying asphalt emulsion based pavement sealer. Fortified with sand for added filling, durability, and traction. The E-Z Stir Gel Formula allows for easy mixing and application.

Uses
Beautifies and protects asphalt pavement surfaces including driveways, walkways, and more.

Directions
Clean Driveway - Sweep all dirt and loose debris from driveway surface. Scrub all oil and gasoline stains with household detergent and water. Rinse off entire driveway surface with water. Do not leave any standing water or puddles.

Clean and Fill Cracks - Remove dirt and vegetation from cracks with screwdriver, wire brush, or other suitable instrument. Flush out crack with hose and water and allow to dry. Fill cracks up to 1/2” wide with SealBest Pourable Crack Filler. Fill larger cracks up to 1” wide with SealBest Trowel Grade Crack Filler. Allow crack filler to dry 24 hours prior to applying SealBest 1000 Driveway Sealer & Filler.

Seal Oil Spots - Apply SealBest Oil Spot Primer to properly cleaned oil and gasoline stains. Allow oil spot primer to dry completely prior to applying SealBest 1000 Driveway Sealer & Filler.

Applying SealBest 1000 Driveway Sealer & Filler - Stir pail thoroughly. Do not dilute. Pour a narrow puddle of material across the driveway. Use suitable driveway sealer applicator to spread material. For best results, walk across driveway from side to side with squeegee or brush applicator. Continuously feed puddle with fresh material. (For a better understanding of this process see illustrations on this pail or visit www.sealbest.com). For optimum performance (and warranty purposes) apply two coats at an application rate of no more than 350 square feet per 4.75-gallon pail per coat. Allow first coat to dry completely before applying second coat. Allow sealer to cure 24-48 hours before opening to vehicle traffic.

 

SB 1000

instructions
Item Number Unit Size Unit Weight Pack Pack Weight
H5411 4.75 Gallon Pail 58 lbs. 1 58 lbs.

Tools Needed:

garden hose paint brush scrub brush squeegee trowel broom          

You May Also Need:
Professional Grade Oil Spot Primer
Professional Grade Elastomeric Pourable Crack Filler
Professional Grade Rubberized Trowel Grade Crack Filler
Elastomeric Blacktop Crack Filler
High Performance Driveway Patch
 

     

2520 South Campbell Street •  Sandusky, Ohio 44870 • Phone: 1-800-326-1994 • (419) 626-4375
Fax: (419) 626-5477 • E-mail: info@sealbest.com

HomeAbout UsContact UsHow To / HelpBlacktop FAQ
ProductsWhere to BuyLiteratureSDS Sheets