8x Acrylic Polymer Modified Driveway Sealer & Filler
• Beautifies & Protects Asphalt Driveways
• Dries to a Deep, Rich Black Color
• Advanced, E-Z Stir Gel Formulation for Easy Mixing & Application
• Acrylic Modified for Added Strength & Flexibility
• Fortified with Sand for Traction & Durability
• Superior Protection from Salt & Chemicals
• High Solids for Maximum Durability
Sizes Available: 4.75 Gallon Pail - Coverage: 250-350 Square Feet
SealBest 800 Driveway Sealer & Filler is a high quality acrylic polymer modified, asphalt emulsion based pavement sealer. SealBest 800 is fortified with sand for added filling, durability, and traction. SealBest 800’s Advanced Gel Formula allows for ease of application.
Beautifies and protects asphalt pavement surfaces including driveways, walkways, and more.
Clean Driveway - Sweep all dirt and loose debris from driveway surface. Scrub all oil and gasoline stains with household detergent and water. Rinse off entire driveway surface with water. Do not leave any standing water or puddles.
Clean and Fill Cracks - Remove dirt and vegetation from cracks with screwdriver, wire brush, or other suitable instrument. Flush out crack with hose and water and allow to dry. Fill cracks up to 1/2” wide with SealBest Pourable Crack Filler. Fill larger cracks up to 1” wide with SealBest Trowel Grade Crack Filler. Allow crack filler to dry 24 hours prior to applying SealBest 800 Driveway Sealer & Filler.
Seal Oil Spots - Apply SealBest Oil Spot Primer to properly cleaned oil and gasoline stains. Allow oil spot primer to dry completely prior to applying SealBest 800 Driveway Sealer & Filler.
Applying SealBest 800 Driveway Sealer & Filler - Stir pail thoroughly. Do not dilute. Pour a narrow puddle of material across the driveway. Use suitable driveway sealer applicator to spread material. For best results, walk across driveway from side to side with squeegee or brush applicator. Continuously feed puddle with fresh material. (For a better understanding of this process see illustrations on this pail or visit www.sealbest.com). For optimum performance (and warranty purposes) apply two coats at an application rate of no more than 350 square feet per 4.75-gallon pail per coat. Allow first coat to dry completely before applying second coat. Allow sealer to cure 24-48 hours before opening to vehicle traffic.